Gutter Replacement Cost With Tear Off Included
What a full tear off and new system runs in 2026, what the total covers line by line, and how to test a quote against the published band.
When a system is rusted, sagging in several places or pulling away along whole runs, patching stops making sense and the question becomes the gutter replacement cost for the whole house. That number is easier to judge than most companies make it look. It is the new system band, plus tear off and disposal, and it should be quoted as one itemized total before anyone climbs a ladder.
Replacing a full gutter system costs $2,200 to $5,000 per home in 2026, or $12 to $25 per linear foot, with tear off and disposal included. These are national averages from published cost guides. Your exact price is set after a measure, in an itemized written quote.
The Headline Figures
The cost for gutter replacement on a typical home is $2,200 to $5,000, and that headline total already includes removing the old system and disposing of it. Per foot, the new work uses the same published installation band of $12 to $25 per linear foot. A smaller one story home with a simple roofline sits near the bottom of the range. A larger or taller home, with more corners and longer downspout runs, sits near the top. If a quote lands well above $5,000 for an ordinary home in standard aluminum, the company owes you an itemized reason, not a sales talk.
As with every price on this site, these ranges are national averages from published cost guides, HomeGuide and Angi for 2026. They are a yardstick for judging quotes, not a promise for your house. The actual price for your home is decided after it is measured, given as an itemized written quote, and fixed before work starts.
What a Gutter Replacement Cost Includes
A full replacement total should cover the whole job, line by line:
- Removal. The old channels, hangers and downspouts come down without tearing up the roof edge or the beds below.
- Disposal. The old material leaves with the crew. It should not be left in your yard or added later as a surprise fee.
- Fascia check. With the old system off, the crew inspects the fascia boards the new system will hang from, and shows you photos of any rot.
- New seamless system. New channels formed to your roofline, hung at the right slope so water runs to the outlets instead of pooling.
- Downspouts. New downspouts sized and placed to carry the roof water clear of the foundation.
- Sealing. Corners, end caps and joints sealed, and the whole system water tested before the crew leaves.
If any of those lines is missing from a quote, ask where it is. A low headline number that quietly excludes disposal or sealing is not a saving. It is a later bill.
Band Maths by Length, Framed for Replacement
Use the same sanity check as a new install: multiply your gutter length by the published $12 to $25 per foot band. The table below is that band applied to four common lengths. For replacement, read it as the new system part of your total. Tear off and disposal sit inside the typical $2,200 to $5,000 home range quoted above, which is why a full replacement total usually sits a little above the bare channel maths for shorter runs.
| Gutter length | Published band applied to length |
|---|---|
| 100 ft | $1,200 to $2,500 |
| 150 ft | $1,800 to $3,750 |
| 200 ft | $2,400 to $5,000 |
| 250 ft | $3,000 to $6,250 |
A quote for a standard aluminum replacement that lands far above the band for your length needs its extras named: steep or high access, copper or box sections, or fascia work shown in photos. Without that list, the number is just a number.
When Replacement Beats Repeated Repair on Cost
One repair is almost always cheaper than a new system, and we say so on our repair cost guide. The maths flips when repairs start stacking up. If you are paying for a fix every season, if rust has spread along several runs, or if the slope is wrong along the whole house so water pools everywhere, each repair buys a few months on a system that is finished. Add up the last two or three repair bills. When that sum starts closing on the low end of the replacement range, a new system with a clean start is usually the cheaper path over the next few years. Our replacement service page walks through the signs we use to make that call, including the cases where we tell owners to repair instead.
What Moves the Price
- Height. Two and three story tear offs are slower and carry more risk than one story work, and the price reflects it.
- Roof complexity. Many corners, valleys and short broken runs mean more cutting, more fittings and more sealing than a plain rectangle.
- Fascia rot. Rotten boards are quoted separately, after photos, once the old system is off and the damage can be measured honestly.
- Material choice. Standard aluminum sits inside the published band. Steel costs more, and copper sits above the band and is priced in the quote.
- Condition of the old system. Heavy, waterlogged or built in old sections take longer to remove safely than light modern channels.
Run Your Own Numbers First
Before you call anyone, test your footage against the band with our free replacement cost calculator. It uses the same published ranges as this page. Take that result into your quote calls, and ask each company to show how its total is built. Companies that welcome the question are the ones whose quotes tend to hold up.
Our own approach is plain: we measure, we photograph the fascia as the old system comes off, and your written quote is fixed before the new work starts. If hidden rot appears, you see the photo and a separate price, and nothing proceeds without your word. When you are ready, one call settles it: call +1 (888) 295-0648 for an itemized quote you can hold us to.
Related guides
Before the totals make sense, the decision has to. These guides cover the question form of replacement cost and the repair comparison.
- How much does it cost to replace gutters?: tear off, haul away and new system totals
- Repair or replace: the decision guide: which side of the line your system sits on
Cost questions, answered straight
I was quoted about $1,978 to $2,328 for roughly 50 ft. Is that fair?
On band maths alone, no. Fifty feet at the published $12 to $25 per foot band is $600 to $1,250 for the new work, well below that quote. A price that high needs itemized justification, such as copper or box gutters, difficult high access, or major fascia work, each named and priced. Also note the pattern in that story: a $350 removal fee waived only if you sign today is a pressure tactic, not a favour.
Does the cost include removing and disposing of the old gutters?
In the totals on this page, yes. A full replacement price should include tear off of the old system and disposal of the material as named lines or as clearly included items. If a quote leaves removal vague, ask for it in writing before you sign, so it cannot appear later as an extra.
Why is fascia repair priced separately?
Because nobody can see the full state of the fascia until the old gutter comes off. Rot is often hidden behind the channel for years. The honest way to handle it is photos after tear off, a separate written price for any rotten boards, and your approval before that work starts. Folding an unknown repair into the main quote would mean guessing with your money.
How long does a written quote stay valid?
The quote itself should say. A proper written quote carries a valid until date on the page, and the price holds until that date with no need to sign on the spot. If a quote has no date, or the price only holds for today, treat that as part of the sales method rather than part of the price.
Get the real number for your home
Published ranges are a start. Your itemized quote is exact, in writing, and fixed before any work begins.
Call +1 (888) 295-0648